I help run a private Mailman mailing list for a group that is occasionally seeing garbled messages in their plain-text digests. The garbled...

Rick Morrison

09-11-2009 11:53 AM
Rick Morrison

Rick Morrison wrote: utf-8 probably doesn't work for you because the Python email library wants to base64 encode utf-8 message bodies, and the...

Mark Sapiro

09-11-2009 11:24 AM
Mark Sapiro

I'm sure this is a standard problem, but I haven't found the answer in any of the FAQs or by searching the mailing list archives. A customer asked...

David Newman

09-11-2009 11:16 AM
David Newman

Corey Jones wrote In Defaults.py. # SUBSCRIBE POLICY # 0 - open list (only when ALLOW_OPEN_SUBSCRIBE is set to 1) ** # 1 - confirmation required...

Mark Sapiro

09-11-2009 11:12 AM
Mark Sapiro

I'm trying to make default 'Require Approval' under Privacy Options. Where do I find a list of config commands so that I can make that default by...

Corey Jones

09-11-2009 11:12 AM
Corey Jones

John Adamski wrote: Once you have moved the lists, bin/genaliases should generate aliases for all lists. You may have to first run bin/fix_url...

Mark Sapiro

09-11-2009 10:56 AM
Mark Sapiro

Is there some way to send a test message to a list that is only sent back to me instead of sending it out to the entire distribution? Sometimes I...

LuKreme

09-11-2009 10:35 AM
AT

On Sep 10, 2009, at 10:27 PM, Stephen J. Turnbull wrote: Barry Warsaw replied: I have a number of list templates (around 20) that I have...

AT

09-11-2009 09:10 AM
AT

LuKreme Which by definition you can't strictly do because you have to alter the outgoing process in some way to remove the other recipients so you...

Mark Sapiro

09-11-2009 08:28 AM
Barry Warsaw

Hi, We have been using your program for a while and every year when we set up a new list we seem to have this same problem ‹ can you help me fix...

Joe Finocchiaro

09-08-2009 08:59 PM
Joe Finocchiaro

We have two servers that have mailman on them (SuSE 2.6.27, postfix, mailman 2.1.11) and we are combining the two servers into one. Keeping the...

John Adamski

09-08-2009 03:07 PM
John Adamski

tanstaafl (AT) libertytrek (DOT) org wrote: Why? Why not just send your post and then approve it? If you set bounce_score_threshold to 1.0 or...

Mark Sapiro

09-08-2009 12:22 PM
AT

LuKreme wrote: There is no Mailman facility for this. Whether you can do it or not depends on what exactly you want to see. If it doesn't have to...

Mark Sapiro

09-08-2009 11:24 AM
Mark Sapiro

Hi, I have a question about the best way to clean up a special list I use with Mailman... The list in question - call it 'valid-senders' - is only...

AT

09-08-2009 08:19 AM
AT

certuspersonality wrote: See the FAQ at <http://wiki.list.org/x/sYA9> and interpret the following responses in terms of that FAQ.

Mark Sapiro

09-07-2009 11:39 PM
Mark Sapiro

Todd Wheeler wrote: More than one? When you change a member from digest to non-digest, that member generally receives one last digest because she...

Mark Sapiro

09-07-2009 11:28 PM
Mark Sapiro

albertlb wrote: See the FAQs at <http://wiki.list.org/x/ioA9>, <http://wiki.list.org/x/loA9> and <http://wiki.list.org/x/moA9>. This seems most...

Mark Sapiro

09-07-2009 11:13 PM
Mark Sapiro

Hello, I have installed mailman and created the mailman list. I received the mail confirming that the mailing list has been created but when I try...

albertlb

09-07-2009 04:42 AM
albertlb

Hien HUYNH HUU <hien.hh (AT) sbsc (DOT) com.vn> writes: Then, from now on, you need to Cc'ing <postmaster (AT) gmail (DOT) com> and <postmaster...

Hien HUYNH HUU

09-07-2009 03:14 AM
AT

New to mailman and testing features for a client. One member address is getting digests yet the setting in the Membership List administrative web...

Todd Wheeler

09-06-2009 05:19 PM
Todd Wheeler

We are using Mailman as part of Cpanel on the Linux server at which our domain is hosted. We allowed list members to post messages to the board but...

certuspersonality

09-05-2009 07:07 AM
certuspersonality

Hello I'm part of a small nonprofit running Mailman version 2.1.9 and we have consistently found that most of our subscribers receive the footers...

Keith Jarvis

09-04-2009 11:21 PM
Stephen J. Turnbull

Keith Jarvis wrote: There are no differences between 2.1.9 and the latest 2.1.12 release in this respect. See the FAQ at...

Mark Sapiro

09-04-2009 07:20 PM
Mark Sapiro

I'm running Mailman version 2.1.9 Is there a setting I could make make to only accept mail to a maillist that comes from the maillist owner? I was...

Eric Parker

09-04-2009 07:18 PM
Eric Parker

Dylan L Evans wrote: These questions are best directed to support resources specific to your MTA, but if you tell us what your MTA is, there may...

Mark Sapiro

09-04-2009 07:08 PM
Mark Sapiro

Eric Parker wrote: That's the basic idea. See the FAQ at <http://wiki.list.org/x/3YA9> for more. -- Mark Sapiro <mark (AT) msapiro (DOT) net> ...

Mark Sapiro

09-04-2009 07:05 PM
Mark Sapiro

Dear GNU Mailman - Team, we want to sponsor 500 $ for the further development of your excellent GNU Mailman Project. Is it possible that we will...

Verwaltung

09-04-2009 07:02 PM
Brad Knowles

Anne Anderson wrote: If you had deleted the messages from the command line with Mailman's bin/discard tool instead of just removing the files,...

Mark Sapiro

09-04-2009 06:50 PM
Mark Sapiro

Our cyber security group sent me notice of a vulnerability in a Mailman web page: Web Application Potentially Sensitive CGI Parameter...

AT

09-04-2009 03:09 PM
George A. Theall

Hello! After a spammer targeted about 80 of our lists, I deleted the held messages by physically removing the files at the command line. However,...

Anne Anderson

09-04-2009 11:26 AM
Anne Anderson

Barry Finkel wrote: Googling '"Web Application Potentially Sensitive CGI Parameter Detection" mailman' doesn't show me anything relevant to...

Mark Sapiro

09-04-2009 10:40 AM
Mark Sapiro

Andrei wrote: Use bin/config_list -o to write the settings from one list to a file, edit out the list specific settings which don't apply to the...

Mark Sapiro

09-04-2009 10:29 AM
Mark Sapiro

Two quick questions: Is it possible to copy list preferences from one list to another? Is it possible to create a regex in mailman that would...

Andrei

09-04-2009 10:06 AM
Andrei

I have a question about zipped list archives; the question arose from a subscriber to one of our lists. I am running Mailman 2.1.11 on Ubuntu from a...

AT

09-03-2009 11:03 PM
LuKreme

Grant Taylor wrote: I agree. The same as it behaves if you ask for 2009-August.txt.gz and there is

Mark Sapiro

09-03-2009 06:03 PM
Mark Sapiro

Barry Finkel wrote: Your web server is converting the gzipped file and serving it as plain text, but MSIE sees the .gz extension and thinks it...

Mark Sapiro

09-03-2009 05:46 PM
Mark Sapiro

I'm using Debian. MAIN_RELAY_NETS is not defined anywhere in my exim4. I don't know where to add this or how. grep -r 'MAIN_RELAY_NETS'...

Andrei

09-03-2009 12:39 PM
Dylan L Evans

We are running Mailman 2.1.12 on Solaris 9 SPARC, Python 2.4.2. What causes the following "decoding Unicode is not supported" error message? I've...

Rosenbaum, Larry M.

09-03-2009 12:14 PM
Rosenbaum, Larry M.

Rosenbaum, Larry M. wrote: I don't know if there was a different email 4.0.1 distributed with Python 2.5 as opposed to Python 2.5.1, or if yours is...

Mark Sapiro

09-03-2009 11:37 AM
Mark Sapiro

A way around these problems may be to use your ISP's mail-relay, rather than delivering directly. Or use a third-party mailer, such as...

Gary R. Schmidt

09-03-2009 07:50 AM
Gary R. Schmidt

Hien HUYNH HUU wrote: Nor do we, and it's likely they won't tell you because they consider such information to be proprietary and of potential use...

Mark Sapiro

09-02-2009 11:12 PM
Mark Sapiro

Andrei wrote: So you need to fix your Exim configuration so it can route mail to external domains. --

Mark Sapiro

09-02-2009 10:27 PM
Mark Sapiro

Thanks to Sean I've made some progress. It seems that local users on lists.host.org server can receive and send emails. Mailman on lists.host.org...

Andrei

09-02-2009 10:04 PM
Andrei

Andrei wrote: Can a local user send to one of these non-local addresses? Can Mailman send to a local address? You are asking Exim configuration...

Mark Sapiro

09-02-2009 09:50 PM
Mark Sapiro

Rosenbaum, Larry M. wrote: Now I'm a bit confused. That line 759 in /usr/local/lib/python2.5/email/message.py doesn't correlate with any of the...

Mark Sapiro

09-02-2009 08:55 PM
Mark Sapiro

I've done some reading through this and other mailing lists, but I can't find anything relating to this topic past 2004; if there is something more...

Christopher C. Wright

09-02-2009 10:59 AM
Christopher C. Wright

Rosenbaum, Larry M. wrote: cp cron/senddigests cron/senddigestsx Then edit cron/senddigestsx Where you see (without the linewrap)

Mark Sapiro

09-02-2009 10:24 AM
Mark Sapiro

This is more of a list management question than a Mailman question, but I need your collective wisdom I just did a mass Subscribe (288 address)...

Jeffrey Goldberg

09-02-2009 04:26 AM
Ralf Hildebrandt

Tried fixing this for 2 days now and no luck. If you can shed some light I would appreciate it. ######################### Output of...

Andrei

09-02-2009 01:45 AM
Stephen J. Turnbull

Andrei wrote: There are one or two people who sometimes read this list who actually know something about the wierd, convoluted way that Debian...

Mark Sapiro

09-02-2009 12:07 AM
Mark Sapiro