table issue - loosign my mind!!

I posted yesterday and have yet to resolve this problem.

Murray, thank for the comments.

Here I have stripped nearly EVERYTHING away.

Still have the same problem. Can't get the table to snap around the two
graphics and hold them in place without a gap appearing between the two..
One graphic is 155x50, the otehr 155x 51

The total height should be 101 but the table DOES NOT want to stay there and
sets itself to 123 (or so).

IF i set size to 101 is doesn't go to 101 and wraparound the graphics, even
if the PI says it is 101.

When I go to preview in IE or NS, the gap forms between the two graphics

www.kittleleedee.com/test2.htm

Thanks

Change <table> to <table cellspacing="0" cellpadding="0" border="0">

--
Murray --- ICQ 71997575
Team Macromedia Volunteer for Dreamweaver
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com - Template Triage!
http://www.projectseven.com/go - DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs, Tutorials & Resources
http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
==================

"P.F." <paul (AT) orion-ics (DOT) com> wrote

I posted yesterday and have yet to resolve this problem.

Murray, thank for the comments.

Here I have stripped nearly EVERYTHING away.

Still have the same problem. Can't get the table to snap around the two
graphics and hold them in place without a gap appearing between the two..
One graphic is 155x50, the otehr 155x 51

The total height should be 101 but the table DOES NOT want to stay there
and
sets itself to 123 (or so).

IF i set size to 101 is doesn't go to 101 and wraparound the graphics,
even
if the PI says it is 101.

When I go to preview in IE or NS, the gap forms between the two graphics

www.kittleleedee.com/test2.htm

Thanks

Had doen that .. just redid and posted. .. .. didn't work.


"Murray *TMM*" <forums (AT) HAHAgreat-web-sights (DOT) com> wrote

Change <table> to <table cellspacing="0" cellpadding="0" border="0"

--
Murray --- ICQ 71997575
Team Macromedia Volunteer for Dreamweaver
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com - Template Triage!
http://www.projectseven.com/go - DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs, Tutorials & Resources
http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
==================

"P.F." <paul (AT) orion-ics (DOT) com> wrote in message
news:cet7i8$as7$1 (AT) forums (DOT) macromedia.com...
I posted yesterday and have yet to resolve this problem.

Murray, thank for the comments.

Here I have stripped nearly EVERYTHING away.

Still have the same problem. Can't get the table to snap around the two
graphics and hold them in place without a gap appearing between the
two..
One graphic is 155x50, the otehr 155x 51

The total height should be 101 but the table DOES NOT want to stay there
and
sets itself to 123 (or so).

IF i set size to 101 is doesn't go to 101 and wraparound the graphics,
even
if the PI says it is 101.

When I go to preview in IE or NS, the gap forms between the two graphics

www.kittleleedee.com/test2.htm

Thanks

see how the <IMG> line in the source jumps up to the same line as <TABLE> on
it's own ?
Weird. Why does it do that when I keep putting it below the TABLE line?



"Murray *TMM*" <forums (AT) HAHAgreat-web-sights (DOT) com> wrote

Change <table> to <table cellspacing="0" cellpadding="0" border="0"

--
Murray --- ICQ 71997575
Team Macromedia Volunteer for Dreamweaver
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com - Template Triage!
http://www.projectseven.com/go - DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs, Tutorials & Resources
http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
==================

"P.F." <paul (AT) orion-ics (DOT) com> wrote in message
news:cet7i8$as7$1 (AT) forums (DOT) macromedia.com...
I posted yesterday and have yet to resolve this problem.

Murray, thank for the comments.

Here I have stripped nearly EVERYTHING away.

Still have the same problem. Can't get the table to snap around the two
graphics and hold them in place without a gap appearing between the
two..
One graphic is 155x50, the otehr 155x 51

The total height should be 101 but the table DOES NOT want to stay there
and
sets itself to 123 (or so).

IF i set size to 101 is doesn't go to 101 and wraparound the graphics,
even
if the PI says it is 101.

When I go to preview in IE or NS, the gap forms between the two graphics

www.kittleleedee.com/test2.htm

Thanks

Have had the same problem with DW changing the table. Even after going in
and making manual corrections DW will change them again if any thing is
altered on the page.

I don't know if it is suppose to be a bug or feature, but it is frustrating.
I have no clue why it happens, but I definitely know what you are talking
about.


"P.F." <paul (AT) orion-ics (DOT) com> wrote

I posted yesterday and have yet to resolve this problem.

Murray, thank for the comments.

Here I have stripped nearly EVERYTHING away.

Still have the same problem. Can't get the table to snap around the two
graphics and hold them in place without a gap appearing between the two..
One graphic is 155x50, the otehr 155x 51

The total height should be 101 but the table DOES NOT want to stay there
and
sets itself to 123 (or so).

IF i set size to 101 is doesn't go to 101 and wraparound the graphics,
even
if the PI says it is 101.

When I go to preview in IE or NS, the gap forms between the two graphics

www.kittleleedee.com/test2.htm

Thanks

<table border="0" cellpadding="0" cellspacing="0">
<tr>
<td> <img src="images/content_05.jpg" name="pic1" width="155"
height="50"></td>
<td><img src="images/content_06.jpg" name="pic2" width="155"
height="51"></td>
</tr>
</table>

--
James M. Shook
http://www.jshook.com